home assistant presence detection automation

using cloudmqtt i was able to set up a free mqtt broker in the cloud and point my girlfriend’s apple phone and my android phone at the server using their app. it meant that we didn’t have to punch any holes in the firewall and we could get a reasonably accurate location on each other. i then went to the map in ha and there my little icon was. the goal of all of this was to be able have our home know if we’re home or not. we will poll the life360 entity to see if i am home or not. now the slightly trickier bit is that if one of us is away, we need to check the state of the other person’s input_boolean to see if they’re away too.

that flow above, the coding in ha is all you need to be able to turn the input_booleans on and off according to if either (or both) of us are home or away. “off”) empty, because i didn’t want the lights to be turned off by bigtimer, as we have our own bedtime routines that take care of that for us. if you did find this useful, and would consider supporting the blog, please take a look at my most recent book. the installation is sitting in a 6th gen celeron nuc, and i live in a fairly decent 4g/lte area. i haven’t even checked the app for probably 4-5mths. we also have companion apps on our ipads and that too can cause issues if we forget to disable tracking there. you know what they say, if it ain’t broke….

when it comes to home automation, your home needs to be smart enough to know if the home is occupied or not. if you have a larger home, your smart home may not be able to “see” that you’re still home when you’re playing hide-and-seek in the closet. once set, you can tell home assistant to send a ping to your device every few minutes, and if your device responds to the ping, home assistant will know you’re home. this setting allows you to define the number of minutes home assistant should wait before it marks you as away. it can also detect when you’re on the way home, and how far away you are from home to determine if it should turn the heater on to warm the house for your imminent arrival. pic.twitter.com/07uwuw8ibo these alarm panels, either software or hardware based (like this z-wave model), allow you to enter a code, and then disarm the system.

you can extend this from your phone, to things like a camera reading your cars license plate in the garage, then the group will be marked as home as well. in the example above i mentioned that you could have a camera checking to see if your car is parked in your garage, and if it is, mark you as home. using the right probability settings, home assistant would be able to determine that i am probably at home, and hence mark me as home. if that’s the case, then the only downside would be that you then can’t use home assistant as a security system, as anyone who comes through a door would “disarm” home assistant when it marks the status as home. the mqtt topic i think is then added to home assistant which you can use in a group, like i’ve done here. do you put home assistant on all the extra pi’s?

presence detection detects if people are home, which is the most valuable input for automation. knowing who is home or where they are, will open a whole range home assistant provides device tracker sensors that can be used to infer if a person is home or not by working out if their mobile phone via to create an automation in home assistant with zones and presence detection you will need two things: a device tracker that can be your mobile phone or a, home assistant best presence detection, home assistant best presence detection, room presence detection, home assistant device tracker automation, home assistant presence detection ping.

personalize automations for other members of the household. what other kinds of ideas am i overlooking? if you had presence detection enabled in i thought i’d write up a post detailing how we tackle presence detection and how we can run some simple modular automations on the back of when it comes to home automation, your home needs to be smart enough to know if the home is occupied or not. this falls under the term of “, bluetooth presence detection home assistant, home assistant presence detection router, home assistant presence detection unifi, home assistant device tracker unknown, home assistant router integration, home assistant presence detection not working, presence detection sensor, home assistant device tracker not working, home assistant presence detection iphone, home assistant person unknown.

When you try to get related information on home assistant presence detection automation, you may look for related areas. home assistant best presence detection, room presence detection, home assistant device tracker automation, home assistant presence detection ping, bluetooth presence detection home assistant, home assistant presence detection router, home assistant presence detection unifi, home assistant device tracker unknown, home assistant router integration, home assistant presence detection not working, presence detection sensor, home assistant device tracker not working, home assistant presence detection iphone, home assistant person unknown.