honeywell 6290w installation

the touchscreen is surface mounted directly to a wall. important: when the touch screen is powered from an auxiliary power supply, always apply power to the control panel first and then the touchscreen. if the system is incorporating only one touchscreen, leave the address set to 1 and select apply . night setup the touchscreen is defaulted to arm the system in the stay instant mode when arming the system using the night icon . wireless failure; the system is not able to communicate with its wireless devices. system setup this icon alerts the user to a control panel message. 4. select the clea n screen icon to disable the touchscreen for 26 seconds so you can wipe the screen clean. 1. select the multimedia icon and then select the picture folder to view. • when the time is set it i s stored in the touchscreen and sent to the control panel when you select the apply icon and answer yes to the following prompt.

if you answer with “no”, the touchscreen tries to communicate with the panel again. the maximum number of users that can be added is limited to the number of users that the panel supports. 4. select a homepage: legacy homescreen or security system to turn the option on or off. if you select , the touchscreen resets and the panel configuration is downloaded from the panel into the touch screen . select to save the user information. select ok or cancel” at any time when a test is not being performed, you can select the back icon to return to the previous screen, or select the home icon to return to your home page. you can change the touchscreen so that it arms the system in a different mode when the night icon is selected by selecting the arming mode to be activated when the night icon is select ed on the “arming” screen. • move the antenna leads away from any wire runs to the receiver/control panel. 1.select setup and system wifi icons to view the list of current wifi information. *for additional troubleshooting procedures, refer to the control panel installation guide.

the 6290w from honeywell is a new take on their previous touchscreen keypad the 6280w. the 6290w is designed to resemble a tablet computer and has a colorful, easy to navigate icon based menu system. the backplate of the 6290w was designed to let you easily upgrade from the 6160 and 6280 keypads without having to do a lot of replacing and adjusting of the current installation spot. not only does the 6290w have a pleasing tablet-like design, but it also features voice annunciation of system and alarm status.

you can also update via an sd card and the sd slot also allows you to load background and screen saver pictures to display when the keypad is not being used. you can also view zone status in the easy to access zone list screen. for programming the system; the 6290w features an alpha-numeric keypad emulator that resembles what you’d see on the 6160 keypad screens. free technical and programming support.

go to “wiring the touchscreen” and complete wiring. 3. secure the mounting plate to a mounting surface using 4 screws (supplied). insert bottom view and download honeywell home touchscreen 6290w installation manual online. touchscreen 6290w security system pdf manual download. this guide provides information on installing and setting up the 6290w touchscreen. the 6290w. series graphical touchscreens are advanced user interface, honeywell 6290w pdf, honeywell 6290w pdf, honeywell 6290w ecp error, honeywell 6290w app, honeywell 6290w manual.

the 6290w touchscreen must be installed to provide a separation distance of at least the honeywell home trademark is used under license from honeywell navigating through the 6290w touchscreen . note: honeywell home is not responsible for any loss of personal information (files, videos, photos, etc.). the 6290w from honeywell is a new take on their previous touchscreen keypad the to do a lot of replacing and adjusting of the current installation spot., honeywell 6290w wifi, honeywell 6290w vs tuxedo, honeywell 6290w compatibility, 6290w firmware. complete the following steps to install a honeywell home 6290w touchscreen keypad with a vista p-series panel:power down panel. wire at panel. run wire through wallplate. wire at keypad. power on the panel. choose a device address. enable ecp address. mount the keypad.

When you try to get related information on honeywell 6290w installation, you may look for related areas. honeywell 6290w pdf, honeywell 6290w ecp error, honeywell 6290w app, honeywell 6290w manual, honeywell 6290w wifi, honeywell 6290w vs tuxedo, honeywell 6290w compatibility, 6290w firmware.